Eiki MCD-100, Owner'S Manual, Page: 59 / 96

59
Icon in the System Tray
About User Right to Login
English
About User Right to Login
Notes on the case where you log into Windows XP Professional/Windows XP
HomeEdition/Windows2000 Professional with user right (right other than administrator right)
If you log into Windows XP Professional/Windows XP HomeEdition/Windows2000 Professional
with user right (right other than administrator right), the following error message will appear
when you start up the MCI Client.
Check whether the IP address of the MCI and that of your computer are in an accessible system
for each other. If it is not accessible, change the setting of the IP address by either of the
following methods.
1. Login again with administrator right, and change the IP address of your computer for an
accessible system. After setting, log into your computer with user right.
2. Login again with administrator right, and change the IP address of your computer which is
possible to communicate with the MCI. After setting, log into your computer with user right.
Before starting up the MCI Client, set [Hardware acceleration] to [None]. ([Hardware
acceleration] is located in [start] - [Control Panel] - [Display] - [Settings] - [Advanced] -
[Troubleshoot].) to make the projection speed faster. This setting is, however, not available with
user right (right other than administrator right). In this case, first login with administrator right
and set [Hardware acceleration] to [None], and then log into your computer with user right
again.
If the setting of [Hardware acceleration] remains [Full], the processing speed of the projected
image is slower compared to [None] (default).