Eiki MCD-100 Owner'S Manual Download Page 25

Page: 25 / 96

English

MCI Client

Slide Converter

Install the Software

Install the Software

Now install the software (MCI Client / Slide Converter)

* When you wish to run MCI Client directly from the CD-ROM, select " Launch MCI Client" at Step 3.

1. Insert the CD-ROM into the CD-ROM Driver.

The software automatically runs and shows the "Select Language" screen. Select the

language you wish to use and press OK button.

Note:

If the “Language Selection” screen does not appear automatically, open [CD-ROM drive] of [My

Computer] of your computer and double-click “AutoRun.exe”. The “Language Selection”

screen will then appear.

2. "Software License window" will be displayed.

Thoroughly read the contents. If you agree to the contents of the software license

agreement, check on the [Agree] radio button and click [OK].

Summary of Contents for MCD-100

































































































Search results

Summary of Contents for MCD-100

Reviews:

Related manuals for MCD-100

Brands by name

Popular brands

Eiki MCD-100, Owner'S Manual

Search results

Summary of Contents for MCD-100

Reviews:

Related manuals for MCD-100

Brands by name

Popular brands