Eiki MCD-100, Owner'S Manual

Page: 18 / 96

18
4. Part Names and Functions, Factory Default Setting, Installation of MCI
q
POWER Indicator （ Green ）
Normal : Lighted
Error : N/A
w
STATUS Indicator （ Yellow ）
Normal : Blinks when receiving packets
(Only when own node receives the packets)
Error : N/A
e
ERROR Indicator
（
Red
）
Normal : Off
Error : Lighted
r
Eject Button
Push this button to eject a multi card.
Multi Card: Wireless LAN Card /
Wired LAN Card/ Compact Flash card.
t
Multi Card Slot
Multi card insertion slot.
y
Latch Button
Used when mounting and removing the unit
from the projector.
u
Mounting Screw
Used when mounting the unit to the projector.
i
Connector Plug
Plugs MCI into the DVI connector of the
projector.
o
Switch Button
Lets the projector detect the MCI is
attached.
!0
Mounting Hooks
Used to attach MCI to the projector.
!1
Test Switch
Used to check the current LAN setting or
return MCI to the Factory default Setting.
For detail, refer to the next page.
Front
Rear
q w e
r
t
y
u
i
o
!0
!1
Part Names and Functions