Eiki MCD-100, Owner'S Manual

Page: 64 / 96

64
10. PJ Controller
Initial Setting
Before using the PJ Controller function, initial setting will be required.
1. Select Initial Setting from the main menu and configure each item.
Main Menu
2. After the Initial Setting, configure each item
Once the initial setting is completed, then go to other items to configure / control.
3. Exit from PJ Controller
To exit from PJ Controller, select [File] > [Exit]
Memo: Real-time Capture and One-shot Capture are not available with the computer using PJ controller
function.
Parameter Description
Language ........................................Select a desired language from the pull-down menu, and click [Set] button.
Model Name....................................Select a model name of the projector to which the MCI is installed.
* Model Name is listed as code in OPTIONAL PARTS section of the
projector’s owner’s manual. PJ Controller can not be functioned with a
wrong code.
Temperature....................................Select Centigrade or Fahrenheit from the pull-down menu and click Set
button.
Comment ........................................
You can store any comments regarding the initial settings. To save the
comments you entered, click [Save] button.