EFORT EC2-S, Operation And Maintenance Manual

Page: 68 / 121

EFORT INTELLIGENT EQUIPMENT CO.,LTD
58
4.4.1 Replace the Controller
Fig. 4-1 Controller
The following table details the steps to replace the controller.
Table 4-7 Steps to Replace the Controller
Number Steps
1 Disconnect the power supply of the control cabinet;
2 disconnect all terminals and network cables on the front of the
controller;
3 use a flat-blade screwdriver to pick up the stop washer as shown in the
figure, and pry the controller out of the mounting rail;
4 take out the controller directly;
5 take out the motion control card on the controller;
6 replace with a new controller;
7 reinstall the removed motion control card and turn it on.
Snap