EFORT EC2-S, Operation And Maintenance Manual

Page: 45 / 121

Electrical Operation and Maintenance Manual for Control Cabinet of EC2-S Industrial Robot
35
2
、
Steps to Insert Motion Control Card
Please follow the steps below to insert the motion control card:
(1) Turn off the controller power
(2) Insert the motion control card into the card slot. Pay attention to the direction, as shown in the
figure below.
Fig. 3-10 Insert the Motion Control Card
3
、
Steps to Pull Out the Motion Control Card
Please follow the steps below to pull out the motion control card:
(1) Turn off the power supply of the control cabinet
(2) Press the control card (note that the motion control card may pop out of the card slot when it is
pressed and released, and it needs to be released slowly).
(3) After the motion control card pops up, pull out the memory card.