DURKOPP ADLER 540-100-1, Manual Complete

Page: 135 / 234

4. Control panel and control unit
In this operating manual only the functions of the keys and the
parameter changes that the operator can make are listed.
4.1 Control panel
Through the operating panel the control is programmed and the
functions for the respective seams are set. This occurs partly through
direct pressing of the corresponding key or through parameter
adjustment. The input of parameters occurs in programming mode “P”.
The parameter and the corresponding values are shown on the display.
In order to avoid inadvertent changes of parameters, the operation of
the control panel is sub-divided into several levels (operator,
technician, manufacturer)
The operator (seamstress) can directly access his/her level.
Access to other levels is only possible after the input of a code number.
1
17