DURKOPP ADLER 540-100-1, Manual Complete

Page: 149 / 234

1
5.6 Setting buttonhole seam
In the program menu “Buttonhole seam”
Select program menu Buttonhole seam
–
Press the P -key.
–
Select the line “ Buttonhole seam ” with the arrow keys
ñ
and
ò
.
–
Press the OK -key.
–
Select the relevant line with the arrow keys
ñ
and
ò
.
–
Press the OK -key. The curser blinks under one of the digit values.
–
Change between the digits with the arrow keys
ï
and
ð
.
–
Increase or decrease the value of the chosen digit with the arrow
keys
ñ
and
ò
.
–
Press the OK -key to confirm. Press the ESC -key.
The following parameters can be changed for the buttonhole seam section:
Intermediate material
width P4.1 - 1,0...+1,0 mm Distance between the inner stitches of the
buttonhole seam.
Stitch distance within
the buttonhole seam
P4.2 0,3...1,5 mm Distance in the y-axis of a double stitch.
Buttonhole width
P4.3 1,6...6,0 mm Overall width of a buttonhole (outer stitches).
Buttonhole seam
tension P4.4 on;off on: additional thread tension on (raised-form)
off: additional thread tension off (flat-form)
Cutting
P4.5 on;off on: cutting during the sewing cycle
off: no cutting
Length in front of the
cut P4.6 -P6.3...5,9 mm 1. Correction of the position of the first tack in
relation to the end of the cut
2. Additional buttonhole length in front of the
cut with asymmetrical cutting within the
buttonhole.
Length behind the cut
P4.7 (1.8 mm - P7.3)-
5,9 mm 1. Correction of the position of the first tack in
relation to the end of the cut
2. Additional buttonhole seam length behind
the cut with asymmetrical cutting within the
buttonhole.
Cut correction x
P4.8 -0,5...+0,5 mm Position of the cut within the buttonhole on the
x-axis.
Correction right side
P4.9 Correction of the right sided buttonhole seam
width, only visible with bartack type A (Cross
bartack).
31