DURKOPP ADLER 540-100-1, Manual Complete

Page: 142 / 234

Select another buttonhole to be sewn within the sequence
Selection between the different programmed buttonholes is always
possible when the sewing menu is displayed
–
Press the arrow keys
ï
or
ð
.
The next or previous buttonhole is selected within the displayed
sequence.
4.7 Programming of sequences
Up to 20 buttonhole sequences can be programmed.
Each sequence can contain up to 20 buttonholes.
4.7.1 Programming a single sequence
Select program menu sequence
–
Press the key “ S ” on the control panel.
The control panel changes to the buttonhole programming
sequence menu.
–
Press the ESC -key to leave this menu.
Selection of the sequence number
–
Select the line for choosing the sequence number with the arrow
keys
ñ
and
ò
.
–
Press the OK -key.
–
Select the sequence number to be programmed with the keys
ñ
and
ò
.
–
Press the OK -key to confirm.
Default example: Buttonhole 1: 1
Buttonhole 2: 0
Programming example: Buttonhole 1: 19
Buttonhole 2: 2
Buttonhole 3: 0
Buttonhole sequence programming
–
Select line “Buttonhole 1:” with the arrow keys
ñ
and
ò
–
Press the OK -key.
–
Select the desired buttonhole program
(1 to 50) with the arrow keys
ñ
and
ò
.
–
Press the OK -key to confirm the selection.
With the confirmation of the buttonhole program a new menu line
appears containing the buttonhole to be programmed next
–
The last line of a buttonhole sequence program always shows the
buttonhole number “Buttonhole X: 0", unless all 20 programs are
occupied.
–
Press the ESC -key to return to the main menu.
24