DURKOPP ADLER 540-100-1, Manual Complete

Page: 181 / 234

6.2 Plug connections at the multiple pin strip (15 fold)
Connect the plug connectors of the buttonhole automat,
the set value initiator and the control panel as follows:
–
REF-signals
Light barrier plug /sensor
on plug connector 4
Note: 8-pole plug is coded.
–
Plug PWM (optional with the electronic thread
tensioner)
Magnetic plugs on plug connector 8
Note: 8-pole plug is coded.
–
Encoder plug sewing motor
Encoder plug signal sewing motor
on plug connector 5
–
Control panel plug
Control panel plug
on plug connector 6
–
Plug I/O 1-8
Operating device plug (pedal switch)
via adapter 9 on plug connector 7
–
Test-Interface 10
Dongle
6.3 Potential compensation
–
Screw the potential compensation cable onto the
control panel.
17
2
8
10
9
4
5
6
7
x140b
x140t
x300b
x170
x120b
x110
11