DURKOPP ADLER 540-100-1, Manual Complete

Page: 143 / 234

4.7.2 Adding a buttonhole at the end of a sequence
–
Select the last line “Buttonhole X: 0" in the programmed buttonhole
sequence with the arrow keys
ñ
and
ò
.
–
Press the OK -key.
–
Select the desired buttonhole program (1 to 50) with the arrow
keys
ñ
and
ò
.
–
Press the OK -key to confirm the selection.
With the confirmation of the buttonhole program a new menu line
appears containing the buttonhole to be programmed.
–
Press the ESC -key to return to main menu.
4.7.3 Deleting a buttonhole within the buttonhole sequence
–
Select the buttonhole program line that is to be deleted with the
arrow keys
ñ
and
ò
.
–
Press the OK -key.
–
Select buttonhole program “0" with the arrow keys
ñ
and
ò
–
Press the OK -key to confirm.
With the confirmation the selected buttonhole will be deleted. Following
buttonholes (if any) will move up.
–
Press the ESC -key to return to the main menu.
4.7.4 Inserting a buttonhole within the buttonhole sequence
Note
The insertion of a single buttonhole program within a buttonhole
sequence is not possible.
–
Make a note of the programmed buttonholes following.
–
Select the desired line of the programmed buttonhole sequence
with the arrow keys
ñ
and
ò
.
–
Press the OK -key.
–
Select the desired buttonhole program (1 to 50) with the arrow
keys
ñ
and
ò
. Press the OK -key to confirm the setting.
–
Then alter the following buttonholes according to your notes.
–
Press the ESC -key to return to main menu.
25
1