DURKOPP ADLER 540-100-1, Manual Complete, Page: 223 / 234

11.3 Alignment of the scissors block
Standard 1:
The scissors block should be at the same level as the lug of the cage
presser bar.
Standard 2:
–
The scissors block should be aligned in parallel position to the
sewing head edge. (3 and 4 mm throw width )
–
For 6 mm equipment turned by 1° counter-clockwise.
Setting :
–
Unscrew the regulating screw for the sewing basket pressure.
–
Loosen the threaded pins 1 and adjust the scissors block according
to the instructions.
ATTENTION!
By turning the scissors block the position of the cage as to the needle
hole is changed.
Correct the cage position according to chapter 9.3, if required.
35
3
1
2