DURKOPP ADLER 540-100-1, Manual Complete, Page: 137 / 234

4.2 Changing parameter values
4.2.1 Numerical values
Numerical values can be altered in the following ways:
–
With the arrow keys
ñ
and
ò
choose the line in which the value
needs to be changed.
–
Press the OK key.
The curser blinks under the position of the value to be changed.
–
With the arrow keys
ï
and
ð
change between the values.
–
With the arrow keys
ñ
and
ò
increase or decrease the chosen
value.
With parameters that can not be arbitrarily changed, by pressing of
the arrow keys
ñ
and
ò
another possible parameter is shown on
the display.
–
Press the OK key.
The set value will be accepted.
–
If the set value is not to be accepted, press the ESC -key.
The original value or setting will be reestablished.
4.2.1 Parameter selection
With some parameters several choices are available.
The parameter can be changed in the following way:
–
With the arrow keys
ñ
and
ò
choose the line with the parameter to
is be changed.
–
Press the OK key.
–
With the arrow keys
ñ
and
ò
change between the possibilities. The
respective parameter is shown.
–
Press the OK key. The set value or parameter will be accepted.
–
If the set value or parameter is not to be accepted, press the
ESC -key.
The original value or parameter setting will be reestablished.
19
1