DURKOPP ADLER 540-100-1, Manual Complete

Page: 136 / 234

4.1.1 Control panel elements
Key Function
When no input panel is activated:
–
Change to the higher level menu.
–
In the main menu, change between the buttonhole programs within
a sequence.
When an input panel is activated:
–
Change between the digits tenths, units and tens.
–
Change lines within the menu. The active line appears white on
black.
When an input panel is activated:
–
Increase or decrease the value of the corresponding digit by 1 or
with functions having several options change between the options,
e.g. “Buttonhole seam tension on” and “Buttonhole seam tension
off”.
–
Activate the input panel. The value can be changed by using “
ñ
”
and “
ò
” keys .
When an input panel is activated:
–
The set value will be accepted
–
Change from a submenu back to sewing mode.
–
Resolve a thread breakage – repair mode, the basket drives to the
end position, raises and releases the material
–
After stopping the sewing procedure the basket drives to the end
position, raises and releases the material
When an input panel is activated:
–
An input is discontinued. The previous value remains valid.
–
The control changes from sewing mode to programming mode. The
buttonhole parameters can be changed in this mode.
–
The control changes from either the sewing mode or programming
mode to the sequence programming mode.
–
The control changes from the sewing mode to the technician mode.
This mode can only be activated by entering a code. In this
operating condition basic machine parameters can be set,
diagnosis and calibration programs can be started
18