DURKOPP ADLER 540-100-1, Manual Complete

Page: 187 / 234

Important !
During the loading process do not remove the dongle and do not switch
off the machine (you will damage the Software)!
Remove the dongle before the next switch-on, otherwise the sewing
software will be reloaded again.
9.2.3 Dongle-Update via Internet
Dongles can be updated with programs available from the Dürkopp
Adler homepage. Please open our homepage
“www.duerkopp-adler.com” where you will find the relevant programs
in the “Download” - section. Prerequisite is our auxiliary download
software “Dongle Copy” which is available in the same section together
with instructions for easy use.
9.3 Language setting
The menu language can only be changed after the basket length and
basket width have been set during the initial installation of the sewing
software. The choices are English (standard setting), German and
parameter. To change the menu language proceed as follows:
–
Press the F key.
The menu point input code will be shown.
–
Enter technician code 25483 . Change the value with the arrow
keys
ñò
, select the position to be changed with the arrow keys
ïð
. Confirm by pressing the OK key.
–
Select the menu point User Settings with the arrow keys
ñò
. Press the OK key
–
Select the menu point Language with the arrow keys
ñò
. Press
the OK key.
–
Select the desired language (German, English, Parameter) with the
arrow keys
ñò
.
Press the OK key. A tick is shown behind the chosen language.
–
Press the ESC key to complete. The main menu will be shown.
23
2