DURKOPP ADLER 540-100-1, Manual Complete, Page: 153 / 234

1
P6.1/ P7.1 E Cross tack (vertical)
Tack stitch distance
P 6.2/ P 7.2 0.2 ... 1.0 mm Distance in the y-axis of a double stitch
Tack length
P 6.3/ P 7.3 0.6 ... 6.0 mm Length of the tack in the y-axis. The input of
parameter P7.3 is only possible when the top
and bottom tack types at are not similar!
Tack width
Right offset
P 6.4/ P 7.4 -1.0 … 1.0 mm The width of the tack is defined through the
buttonhole width. With the use of right offset
the width of the tack to the right can be
increased.
Tack width
Left offset
P 6.5/ P 7.5 -1.0 … 1.0 mm The width of the tack is defined through the
buttonhole width. With the use of left offset the
width of the tack to the left can be increased.
Moving tack at
the top
P 6.6/ P 7.6 -1.0 … 0 mm The position of the tack can be pushed down.
Moving tack at the
bottom
P 6.6/ P 7.6 0 … 1.0 mm The position of the tack can be pushed up.
Tack tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
P6.1/ P7.1 G Eye tack
Tack width
P 6.5/ P 7.5 2.0 … 6.0 mm External diameter of the eye
Tack stitch number
P 6.3/ P 7.3 2 … 50 Number of outer stitches, that will form the
semicircular tack.
Tack tension
P 6.7/ P 7.7 on / off on: raised form tack
off: flat form tack
The parameter of the special tack types H
simple tack are changed with the buttonhole
P6.1/ P7.1 H Simple tack (bartack), seam parameters.
Stitch distance within
the buttonhole seam
P4.2 0.2 … 1.0 mm Distance in the y-axis of a double stitch
Buttonhole width
P 4.3 1.0 … 6.0 mm Total width of the buttonhole
Buttonhole seam
tension
P 4.4 on / off on: raised form
off: flat form
Stitch length of
tacking stitches
P 4.6 0.2 … 3.0 mm Stitch distance of tacking stitches
Thread tension of
tacking stitches P 4.7 on / off Tacking stitch seam resistance
35