DURKOPP ADLER 540-100-1, Manual Complete

Page: 206 / 234

4.4.3.4 Formatting
In order to be able to save buttonhole data on a data dongle this has to
be formatted. A data dongle can only be used on a machine class for
which it has been formatted. If you have formatted the dongle on e.g.
class 540-100-1, you can only save buttonhole programs of the
540-100-1 on the dongle. If the dongle is to be used on another
machine class, it has to be formatted on this class anew.
ATTENTION!
A machine dongle can be formatted, too! The software is deleted
in the course of this!
Through formatting the machine dongle becomes a data dongle.
Enter the name of the data dongle (14 characters max.):
–
Press the OK key in the submenu Formatting.
–
Select the point to be edited with the cursor keys
ï
and
ð
.
–
Select the character with the cursor keys
ñ
and
ò
.
–
The input is confirmed with the OK key.
–
Press the P key in order to start the formatting.
Confirmation:
“Yes” - the dongle is formatted.
“No” - back to the submenu Dongle.
18