9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 7
MAINTAINING YOUR ARMOR X10GX
Page 188 of 234
ARMOR X10gx Tablet Computer
Ca rin g Fo r th e Dis p la y S c re e n
The following tips will help you keep your display clean and healthy:
CAUTION!
Use only canned compressed air to clean your screen. Do not use
an air compressor. Damage to the screen surface could result.
CAUTION!
Do not attempt to remove stuck particles with a fingernail or other
hard object as this can permanently damage the touch screen
surface.
•
Do not use an abrasive or metallic pointer on the screen surface as this may damage the
screen. Use the pen included with your X10gx, a passive stylus designed for touch
screens (not included) or your fingertip.
•
Use alcohol or a plastic cleaner such as Plexus™ to clean the pen tip.
•
Be careful not to let sand or grit stay on the screen as this can scratch the surface when
wiped with a cloth. Use canned compressed air or a soft bristle brush to remove loose
particles before wiping with a cloth.
•
Use the special ARMOR cloth that came with your X10gx to wipe away dust and
fingerprints.
•
For stubborn residue, clean the surface with plain water or water with a few drops of dish
soap added and pat dry with a clean paper towel or cloth, then use the special ARMOR
cloth that came with your tablet to remove any remaining residue.
•
Use a cotton swab with plain water, soapy water, alcohol or glass cleaner to gently
remove particles stuck to the surface.
Cle a n in g th e Ta b le t Ca s e
•
Use a clean cloth dampened with water to wipe down the case.
•
For stubborn dirt or contaminants, use a cloth dipped in plain or soapy water. Remove
any soap residue with a clean cloth dampened in plain water.
•
Wipe out battery compartments using a clean dry cloth. Use a soft bristle brush or
canned air to remove loose particles.
•
Batteries can be cleaned in the same way.