9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 5
YOUR ARMOR X10GX SOFTWARE
Page 118 of 234
ARMOR X10gx Tablet Computer
Bu tto n s S e tu p Dia lo g
The Buttons Setup dialog window is shown in Figure 65. It allows you to assign two different
functions for each programmable button (PB) labeled P1, P2 and P3. These buttons are located
on the X10gx control panel (see Figure 2).
The first function is activated by pressing and releasing the PB (
P1, P2
or
P3
). The second
function is a combo function activated by first pressing and releasing the
Fn
button and then
pressing and releasing a PB (
Fn+P1, Fn+P2, Fn+P3
). This provides a total of 6 individual
functions that can be activated using the PBs. The function currently programmed is shown in
the field next to the PB or the PB combo.
NOTE
If you exit ARMORutils completely, you will lose programmable button
functionality. Restart ARMORutils to reactivate the PBs.
Figure 65. ARMORutils Buttons Setup Dialog Window
PB
PB
COMBO
