DRS Technologies Armor X10gx, User Manual

Page: 172 / 233

9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 7 MAINTAINING YOUR ARMOR X10GX Page 171 of 234
ARMOR X10gx Tablet Computer
Table of Contents List of Figures List of Tables Acronyms Glossary
7. MAINTAINING YOUR ARMOR X10GX
Re p la c in g th e S o lid -S ta te Drive (S S D)
The SSD is located in the Flexspace compartment in the back of the tablet (see Figure 4).
Follow the procedure in Table 21 to remove and replace the drive.
NOTE
The SSD should only be removed or installed by a qualified technician in a
controlled environment.
Table 21. Remove and Replace the Solid-State Drive
STEP ACTION
1.
Power down the tablet and disconnect any external power.
2.
Remove the 12 Philips screws securing the Flexspace compartment cover and
remove the cover to expose the drive, as shown in Figure 103.
3.
Disconnect and remove the drive.
4.
Install and connect the replacement drive.
5.
Replace the Flexspace compartment cover and secure with the 12 Philips
screws.
6.
Torque each screw to 3 kg-cm (2.6 lb-in).