9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev D
SECTION 7
MAINTAINING YOUR ARMOR X10GX
Page 175 of 234
ARMOR X10gx Tablet Computer
In s ta llin g a S IM Ca rd
Follow the procedure in Table 23 to install your SIM card.
CAUTION!
Circuit boards containing electrostatic discharge (ESD) sensitive
devices are exposed in this compartment. Static-free handling
and processing is required to prevent possible damage to the
components.
CAUTION!
Use care when operating the X10gx with the cooling register
removed. Internal voltages are exposed to possible short circuit.
NOTE
This procedure should only be performed by a qualified
technician in a controlled environment.
Table 23. Installing a SIM Card
STEP
ACTION
condition or indication
1.
Power down the tablet and disconnect
any external power.
2.
Remove the batteries.
3.
Remove the 12 Philips screws securing
the hard drive cover and remove the
cover to expose the hard drive, as shown
in Figure 105.
4.
Disconnect and remove the hard drive to
expose the SIM card socket, also shown
in Figure 105.
