Dräger Infinity Delta Series, Supplement Manual

Page: 46 / 120

Supplement for Infinity Delta Series Software
46 Supplement – Infinity ® Delta Series Software VF10.1
etCO2 Setup
To access the etCO2 setup menu
 Click on the etCO2 parameter box.
or
1 Press the Menu fixed key.
2 Click on Patient Setup .
3 Click on Parameters to display a list of available parameters.
4 Click on etCO2.
Quick Reference Table - etCO2 Setup
Click on the etCO2 parameter box to execute
etCO2 setup functions:
Menu Item Description Settings
Source Describes what CO2 device is connected and
displays parameters on the monitor.
NOTE
– If one CO2 device is connected to the
monitor, the setting automatically displays
the appropriate device (read-only).
– If two CO2 devices are connected, the
settings are made available to the user to
select the desired CO2 device.
(See also the “Multiple CO2 Devices” section.)
– SCIO
– Mainstream
Scale Sets the etCO2 waveform scale. 40, 60, 80, 100 mmHg (40 mmHg
default)
5, 8, 12, 16 kPa (5 kPa default)
5, 8, 12, 16% (5% default)
Resp. Sweep
Speed Sets the respiratory waveform sweep speed on
the screen’s display. 6.25, 12.5, 25, 50 mm/s
(6.25 mm/s default)
Gas
Compensation Determines gas percentages for inspiratory and
expiratory breathing. – Air (default)
– N2O/O2 (in OR mode only)
– O2>60%
– HeliOx
Atm. Pressure Sets the compensation for ambient atmospheric
pressure. 540-800 mmHg in increments of
1 mmHg (760 mmHg default)
72.0-106.7 kPa in increments of
0.1 kPa (101.3 kPa default)
Cuvette Type Sets the cuvette type for adult and pediatric
adapters. – Disposable
– Reusable (default)