Dodge avenger 2013 Owner'S Manual Download Page 254

Page: 254 / 631

NOTE:

If ACC is resumed or set with the ESC/TCS off,

ESC will automatically be re-engaged.

To Turn Off

The system will turn off and erase the set speed in
memory if:

•

You push and release the ON/OFF button.

•

You turn OFF the ignition.

To Resume Speed

Press the RES

button and release. Then remove your

foot from the accelerator pedal. The EVIC will display the
last set speed.

NOTE:

You can resume ACC from a minimum of 18 mph

(30 km/h).

Adaptive Cruise Control (ACC) Cancelled

252

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands

Dodge avenger 2013, Owner'S Manual

Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands