Dodge avenger 2013 Owner'S Manual Download Page 163

Page: 163 / 631

•

Touch the + next to the Favorite you would like to
remove.

•

The Options pop-up will display, touch “Remove from
Favs”.

Emergency And Towing Assistance

The Emergency and Towing Favorite numbers can only
be altered. These cannot be deleted and the names cannot
be changed.

To change the Emergency or Towing number follow these
steps.

•

Touch the “Phonebook” soft-key from the Phone main
screen.

•

Touch the “Favorites” soft-key. Next scroll to the bottom
of the list to locate the Emergency and Towing Favorites.

•

Touch the + Options soft-key.

•

Touch the + next to appropriate Favorite that is to be
altered.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

161

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands

Dodge avenger 2013, Owner'S Manual

Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands