Dodge avenger 2013 Owner'S Manual Download Page 550

Page: 550 / 631

3. Remove the used filter.

4. Install the new filter with arrows pointing in the

direction of airflow, which is toward the rear of the
vehicle (text and arrows on the filter will indicate this).

5. Close the filter access cover.

Refer to the “Maintenance Schedule” for the proper
maintenance intervals.

Filter Access Cover

A/C Air Filter

548

MAINTAINING YOUR VEHICLE

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands

Dodge avenger 2013, Owner'S Manual

Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands