Dodge avenger 2013 Owner'S Manual Download Page 513

Page: 513 / 631

4. Remove the spare tire.

5. Remove the fastener securing the jack.

6. Remove the scissors jack and lug wrench from the

spare wheel as an assembly. Turn the jack screw to the
left to loosen the lug wrench, and remove the wrench
from the jack assembly.

Spare Tire Fastener

Jack Fastener

WHAT TO DO IN EMERGENCIES

511

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands

Dodge avenger 2013, Owner'S Manual

Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands