Dodge avenger 2013 Owner'S Manual Download Page 250

Page: 250 / 631

NOTE:

You cannot enable ACC under the following

conditions:

•

When you apply the brakes.

•

When the parking brake is set.

•

When the automatic transmission is in PARK, RE-
VERSE or NEUTRAL.

•

When pushing the RES

button without a previously

set speed in memory.

To Activate

Push and release the ON/OFF button. The ACC menu in
the EVIC displays “Adaptive Cruise Ready.”

Adaptive Cruise Control (ACC) Ready

248

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands

Dodge avenger 2013, Owner'S Manual

Search results

Summary of Contents for avenger 2013

Reviews:

Related manuals for avenger 2013

Brands by name

Popular brands