manualshive.com logo in svg

Dodge avenger 2013, Owner'S Manual

The Dodge Avenger 2013 Owner's Manual is a comprehensive guide that provides essential information about your vehicle. With easy-to-understand instructions and detailed illustrations, this manual is available for free download from manualshive.com. Ensure optimal performance and safe driving by having this manual at your fingertips.

Share
Download
background image

NOTE:

•

P (Passenger) - Metric tire sizing is based on U.S.
design standards. P-Metric tires have the letter “P”
molded into the sidewall preceding the size designa-
tion. Example: P215/65R15 95H.

•

European-Metric tire sizing is based on European
design standards. Tires designed to this standard have
the tire size molded into the sidewall beginning with
the section width. The letter

⬙

P

⬙

is absent from this tire

size designation. Example: 215/65R15 96H.

•

LT (Light Truck) - Metric tire sizing is based on U.S.
design standards. The size designation for LT-Metric

tires is the same as for P-Metric tires except for the
letters “LT” that are molded into the sidewall preced-
ing the size designation. Example: LT235/85R16.

•

Temporary spare tires are spares designed for tempo-
rary emergency use only. Temporary high pressure
compact spare tires have the letter “T” or “S” molded
into the sidewall preceding the size designation. Ex-
ample: T145/80D18 103M.

•

High flotation tire sizing is based on U.S. design
standards and it begins with the tire diameter molded
into the sidewall. Example: 31x10.5 R15 LT.

442

STARTING AND OPERATING

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for avenger 2013

JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
Vauxhall MOVANO Owner'S Manual preview
MOVANO
Brand: Vauxhall Pages: 177
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
Maserati Gransport Owner'S Manual preview
Gransport
Brand: Maserati Pages: 210
OnStar liveon Owner'S Manual preview
liveon
Brand: OnStar Pages: 22
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
VER-MAC PCMS Series Operation, Safety And Maintenance Manual preview
PCMS Series
Brand: VER-MAC Pages: 64
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12

Brands by name

Popular brands

Load more brands