manualshive.com logo in svg

Dodge avenger 2013, Owner'S Manual

The Dodge Avenger 2013 Owner's Manual is a comprehensive guide that provides essential information about your vehicle. With easy-to-understand instructions and detailed illustrations, this manual is available for free download from manualshive.com. Ensure optimal performance and safe driving by having this manual at your fingertips.

Share
Download
background image

WARNING!

(Continued)

•

Do not place anything on the seat or seatback that
insulates against heat, such as a blanket or cushion.
This may cause the seat heater to overheat. Sitting
in a seat that has been overheated could cause
serious burns due to the increased surface tempera-
ture of the seat.

Front Heated Seat Operation — Vehicles Equipped
With Uconnect® 4.3:

Press the CLIMATE hard-key (located next to the
Uconnect® screen) to enter the climate control screen.

Press the “Driver” or “Pass” seat soft-key (lo-
cated on the Uconnect® screen) once to select
HI-level heating. Press the soft-key a second
time to select LO-level heating. Press the soft-

key a third time to shut the heating elements OFF.

Front Heated Seat Operations — Vehicles
Equipped With Uconnect® 8.4 and 8.4 Nav:

Press the “Controls” soft-key located on the Uconnect®
display.

Controls Soft-Key

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

203

Summary of Contents for avenger 2013
























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for avenger 2013

Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Renault KANGOO BE BOP Driver'S Handbook Manual preview
KANGOO BE BOP
Brand: Renault Pages: 198
SuperATV IN-WS-K-TRX Installation Instructions preview
IN-WS-K-TRX
Brand: SuperATV Pages: 2
Quadratec QuadraTop Adventure Top S Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 13
Jeep WG Grand Cherokee 2002 Service Manual preview
WG Grand Cherokee 2002
Brand: Jeep Pages: 74
Audiovox CDC-TO3 Installation Manual preview
CDC-TO3
Brand: Audiovox Pages: 2
Subaru Forester 2.5X 2003 Technicians Reference Booklet preview
Forester 2.5X 2003
Brand: Subaru Pages: 44

Brands by name

Popular brands

Load more brands