Dinolift DINO 260XT, Operating Instructions Manual

Page: 27 / 101

DINO 260XT
27
16. Move the platform to the work object
The platform movements can be operated with continually adjustable speed from the platform control
panel (not from the chassis control panel). Only one movement can be operated at a time. If several
control levers are operated simultaneously, only the movement with the least resistance will operate.
DO NOT DAMAGE THE TOW-BAR JOCKEY WHEEL!
DO NOT TAKE ADDITIONAL LOAD IN THE UPPER POSITION!
ATTENTION!
Lowering the platform to transport position: Always before lowering the boom onto the transport support,
retract the telescope completely and turn the platform perpendicular to the boom.
17. Observe when lifting the platform
-
the operating range of the platform depends on the load (see Technical Data) and is monitored by the
safety limit switches RK4 and RK5, which are located under the protecting cover
The limit switches must not be adjusted or modified. The inspection and adjustment may only be
carried out by an authorized serviceman.
18. Working a long time in the same position
-
there are pushbuttons for both stopping and starting on both the platform and the chassis control
panels
When the weather is warm and the platform is kept for a longer period in the same position, it is not
necessary to let the engine run continuously.
-
when the weather is cold, it is recommended to let the engine run to keep the hydraulic oil warm
-
It is recommended to also leave the combustion engine running between the operations, to ensure the
battery remains well charged
-
check the stability and condition of the base regularly during the operation, taking into account the
weather and ground conditions