Dinolift DINO 260XT, Operating Instructions Manual, Page: 73 / 101

DINO 260XT
73
PLATFORM CONTROL PANEL (OK), RELAYS
K13: CONTROL RELAY FOR SIGNAL LIGHTS WHICH INDICATE THE STATE OF LOADING OF
THE PLATFORM
The relay is controlled by the limit switch RK4.
K14 AND K15: CONTROL RELAYS FOR TURNING THE PLATFORM (TO THE RIGHT- TO THE
LEFT)
The relays are controlled by inductive limit switches RK9 and RK10 of the linear actuator (M3).
PLATFORM CONTROL CENTRE (OK), SWITCHES
JSO: RIGHT JOYSTICK
(movements: boom up - down and turn right – left)
JSV: LEFT JOYSTICK
(movements: telescope out - in and articulated arms up – down)
S4: LOCKING EMERGENCY STOP SWITCH
Stops all other functions except the emergency descent and the sound signal, which remain
operational.
S5: STOP SWITCH
Non-locking button switch.
S6: : START SWITCH
Non-locking button switch.
S10: SOUND SIGNAL SWITCH
Non-locking button switch.
S11: EMERGENCY DESCENT SWITCH
Non-locking button switch.
S12: CONTROL SWITCH FOR TURNING OF THE PLATFORM
S29: SELECTOR SWITCH FOR LEVELLING OF PLATFORM
Non-locking button switch.
S30: CONTROL SWITCH FOR PLATFORM LEVELLING
Non-locking lever switch.
The levelling is operated by pressing the button S29 and tuning the lever switch S30.
S31: TELESCOPE IN
After the SR3 has tripped, the telescope can be retracted by depressing the button.