Dinolift DINO 260XT, Operating Instructions Manual

Page: 49 / 101

DINO 260XT
49
10. Operation of the safety devices while they are controlled from the chassis control panel
-
lift the platform slightly up from the transport position
-
the outriggers must not operate in any position of the selector switch
-
lift the boom and test the following:
1. emergency stop (3)
2. emergency descent, retraction of telescope
3. emergency descent, lowering of the boom
-
bring the boom to the transport position and lift the outriggers with the driving device connected.
-
the boom must not operate in any position of the selector switch
-
disconnect the driving device and lower the outriggers (bring the lift to a level position)
-
put a load of about 80 kg onto the platform
-
lift the boom and extend the telescope
The movement stops as soon as the red outreach limit signal light lights up (at max. outreach).
Now:
- the lifting of the boom should be operational
- the retraction of the telescope should be operational.