Dinolift DINO 260XT, Operating Instructions Manual

Page: 46 / 101

DINO 260XT
46
3. Check the hydraulic hoses and pipes
Replace any externally damaged hoses or clashed pipes. Check the connections.
4. Inspect joints of the support outrigger
-
lower the outriggers slightly
-
swing the outriggers back and forth in the horisontal plane and check the joints for play
-
check the operation and condition of the limit switch mechanisms on the outriggers
- replace any worn out parts
- lubricate the joints (refer to the lubrication plan)
Lower the outriggers to support position.
5. Inspect the cylinders, and lubricate the joint bearings (refer to the lubrication plan).
- drive the lift cylinder to its upper position from the chassis control panel and inspect the condition of
the piston rod and tightness of the connections
- drive the lift cylinder to its lower position from the chassis control panel and inspect the connections
for tightness
- retract and extend the telescope cylinder from the chassis control panel and inspect the condition and
tightness of the cylinder
- lubricate the joints of the lifting, telescope and levelling cylinders
- extend the articulated arm cylinders from the lower control panel and inspect their condition and
tightness
- inspect the outrigger cylinders and lubricate their joints