Dinolift DINO 260XT, Operating Instructions Manual

Page: 36 / 101

DINO 260XT
36
SERVICE AND INSPECTION INSTRUCTIONS
1. The first service after 20 hours of operation
-
change the pressure and return filter elements
-
adjust the brakes according to the instructions on page 37
-
check the the wheel bolts for tightness after about 100 km of driving (325 Nm)
2. Daily service
-
check the oil level in the hydraulics, top up if necessary
-
check the hydraulic connections
-
check the unit visually
-
check the operation of the emergency descent and emergency stop functions
-
check the operation of the safety devices
3. Weekly service
-
check the tyre pressure (700 kPa, jockey wheel 250 kPa)
-
grease the fulcrum pins (refer to lubrication plan, page 40)
-
check the sliding surfaces of the telescope and apply silicon if necessary
-
check the clearance between the slide pads and surfaces and adjust the pads if necessary
-
put a load of about 80 kg onto the platform and drive the boom to level position
Continue by extending the telescope until the red signal light lights up and the movement stops. Measure
the stroke in accordance with the instruction on page 49 and compare it with setting of the "overload limit
switches" RK4 on page 50. If the stroke exceeds the allowed value, contact the service person.
4. Service every six months
-
change the hydraulic oil and both filters
-
check the condition of the brakes
-
check the the wheel bolts for tightness (325 Nm)
-
grease the gear ring of the turning device
5. Periodic service every 12 months ín accordance with the instructions for regular servicing below
in this manual
IF THE LIFT IS OPERATED UNDER DEMANDING CONDITIONS (IN EXCEPTIONALLY
HUMID OR DUSTY ENVIRONMENT, CORROSIVE CLIMATE, ETC.) THE INTERVALS
BETWEEN THE OIL CHANGES AND THE OTHER INSPECTIONS SHALL BE SHORTENED
TO MEET THE PREVAILING CONDITIONS IN ORDER TO MAINTAIN THE
OPERATIONAL SAFETY AND RELIABILITY OF THE LIFT.
THE PERFORMANCE OF THE PERIODIC SERVICING AND THE INSPECTIONS IS
ABSOLUTELY MANDATORY, BECAUSE THEIR NEGLIGENCE MAY IMPAIR THE
OPERATIONAL SAFETY OF THE LIFT.
THE GUARANTEE WILL NOT REMAIN VALID, IF THE SERVICING AND THE PERIODIC
INSPECTIONS ARE NOT PERFORMED.