Dinolift DINO 260XT, Operating Instructions Manual

Page: 25 / 101

DINO 260XT
25
OPERATING THE LIFT FROM THE PLATFORM PANEL
Note! If you have levelled the chassis of the lift on a GRADIENT, proceed as instructed on page 23.
11. Turn the selector switch (1) to position 2 and take away the key
Do not lock the chassis control panel cover with the key.
-
now you can operate the boom with levers 17 and 19 on the platform control panel, carefully move the
lever in the desired direction of movement
If you move the lever before pushing the rocker switch, the action is deterred.
-
test the operation of the emergency descent system as follows:
-
start by lifting the boom about 1 - 2 metres (with lever 17) and continue by extending the telescope 1 -
2 metres (with lever 19) keeping the emergency stop button depressed - thus the movement shall stop
-
start the power unit of the emergency descent system (pushbutton 20), retract the telescope (lever 19)
and lower the boom (lever 17)
-
pull up the emergency stop button
DO NOT DAMAGE THE TOW-BAR JOCKEY WHEEL!