Dinolift DINO 260XT, Operating Instructions Manual, Page: 18 / 101

DINO 260XT
18
18. Signal lights
- green inside allowed outreach range
- red at the border of allowed outreach range
20. Emergency descent device start button
21. Fuse
22. Emergency stop
- push to stop
- pull to reset
23. Sound signal
24. Socket outlet 230VAC (2 pcs.)
25. Stopping the engine
26. Starting the engine
30A. Turning the platform, pushbutton
30B. Lever for levelling of the platform (is used simultaneously with pushbutton 30A)
35. Turning of the platform
36. Telescope in, pushbutton
MEASURES TO BE TAKEN IF THE LIFT IS AT RISK OF LOSING ITS
STABILITY
The reason for the reduced stability can be a fault in the lift, the wind or other lateral force, collapse of the
standing base or negligence in providing sufficient support. In most cases a sign of the reduced stability is
the inclination of the lift.
1. If there is time, try to find out the reason for the reduced stability and the direction of its effect.
Warn other people on the work site using the alarm signal.
2. Reduce the outreach to the side by retracting the telescope. Avoid abrupt movements.
3. Turn the boom away from the danger zone, i.e. to a position where the stability of the lift is
normal.
4. Lower the boom.
If the stability has been lost as a result of a fault in the lift, repair such a fault immediately.
Do not use the lift until the fault has been repaired and the condition of the lift has been verified.