Diener femto, Operating Instructions Manual, Page: 89 / 156

- 89 -
1
1
.
.
8
8
G
G
e
e
n
n
e
e
r
r
a
a
t
t
o
o
r
r
RFG 13,56 / 300 Generator:
Front
1. Main power switch with control lamp
2. Power (set point potentiometer)
The set point of RF-Power can be set with this potentiometer in manual operating mode.
3. Power display
Shows the real/actual power value of the generator.
4. Green indicator lamp “LF on”
It has to be activated. The lamp shines if output power is higher than approx. 10%.
5. LED overheat
The LED shines if generator is overheated.
6. LED max. power
The LED
shines when the max. power is reached resp. exceeds.
7. LED +50V
8. LED overload
The LED shines if generator is overloaded.
9. LED pulse
This LED is only of matter if you have a pulse generator. It shows the actual operating mode (pulsed
or continuous wave).
3. Power display
‚Reflected Power’
3. Power display
‚Forward Power’
2. Power
(set point
potentiometer)
1. Main power switch
with
control lamp
4. Green indicator lamp
„RF on“
5. LED overheat
6. LED max. power
7. LED +50 V
8. LED overload
9. LED pulse