- 72 -
1
1
.
.
7
7
.
.
C
C
o
o
n
n
t
t
r
r
o
o
l
l
s
s
6.3.12 Function of the diagram
At the lower range of the diagram there is a function bar.
In this function bar there are 10 buttons and 1 scrollbar.
This button is used for auto scroll on/off. Is this button pressed, the diagram is automatically
scrolled, and always the actual record is shown in the visible area.
Remove this button and the scrollbar can be used to regard the history of the process.
Recording of data will not be stopped. If the auto scroll button will pressed again the actual
data will be shown in the diagram.
This button is used for auto scaling on/off. If the data record is wider than the screen width, it
will be scaled on the half screen width. After the time of one hour, the autoscaling is stopped
and the diagram will only be auto scrolled.
This button is used for „Halve time axis range (zoom in)". The time intervals will be smaller
and the curve will be wider.
This button is used for „Double time axis range (zoom out)". The time interval will be bigger
and the curve will be smaller.
This button is used for adjusting time axis. The following dialog appears:
Summary of Contents for femto
Page 23: ...23...