manualshive.com logo in svg

Diagnostic Instruments SPOT, User Manual

Share
Download
Diagnostic Instruments SPOT User Manual Download Page 54

Ch. 4 - Taking a Picture

Captures for Preparation and Modification

User's Guide to the SPOT Cooled Color Digital Camera, 6/9/98

54

To use the Compute Exposure option, follow these steps:

1.

 

From the Camera menu, select the Compute Exposure option.

Shortcuts

:

  To compute exposure values, you can also use one of the following two

methods:

−

 

Press 

[F 10]

.

−

 

Click on the Compute Exposure values button on the toolbar:

2.

 

The Compute Exposure window appears as shown below:

3.

 

For your review, the Compute Exposure window displays the image setup options
(for the current setup) that directly affect the computation.  The entries for these
options can be modified from this window, but if you do so, you also change the
current image setup.  If you want to save the exposure times to a different image
setup, enter the settings for that setup.

!

Note:  For information on entering Image Type, Auto-Gain Limit, Adjustment
Factor, and White Balance, refer to Chapter 3, Preparing to Take a Picture.

4.

 

Click on the Begin button.  The Status message changes to 

Computing exposure…

You should hear a series of clicks as the camera samples the light.

Summary of Contents for SPOT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands