manualshive.com logo in svg

Diagnostic Instruments SPOT, User Manual

Share
Download
Diagnostic Instruments SPOT User Manual Download Page 10

Ch. 2 - Navigating the SPOT Software

The Viewing and Editing Window

User's Guide to the SPOT Cooled Color Digital  Camera, 6/9/98

10

Introduction

This chapter is an introduction to the SPOT program's operating environment.  It consists
of three major sections:

§

 

The Viewing and Editing Window - This section describes the primary window for
all image capture and editing functions.

§

 

Opening and Saving Files - This section discusses the standard Windows file save
and open features, as well as those that are unique to the SPOT program.

§

 

Preliminary Settings - This section describes the initial settings that you can make to
customize your software.

The Viewing and Editing Window

When you open or capture an image, it appears in the main viewing and editing window.
All of the image save, view, edit, and annotation functions are accessed from this
window, which consists of three areas:

§

 

Menus

§

 

The Toolbar

§

 

The View Status Bar

Each of these areas is discussed in the three sections that follow.

Menus

The menus that appear at the top of the window vary according to whether an image is
open, and whether you are editing or annotating an image. When you first open the
software, the only functions that are available are the file opening, image setup, and
image capture options.

§

 

File opening - The file open and save options are for the most part identical to the
standard Windows file open and save options.  There are also several features that are
unique to the SPOT software.  Refer to the Opening and Saving Files section in this
Chapter for more details on opening and saving image files in SPOT.

§

 

Image setup - Defining or selecting an image setup is the crucial first step in the
picture taking process. All of the image setup options can be accessed via the Setup
menu.  Refer to Chapter 3, Preparing to Take a Picture, for more details on defining
and utilizing image setups.

§

 

Image capture - Image capture (picture taking) options are accessed via the Camera
menu.  For more details on capturing an image, refer to Chapter 4, Taking a Picture.

Summary of Contents for SPOT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands