manualshive.com logo in svg

Diagnostic Instruments SPOT, User Manual

Share
Download
Diagnostic Instruments SPOT User Manual Download Page 51

Ch. 4 - Taking a Picture

Capturing Initial and Final Images

User's Guide to the SPOT Cooled Color Digital Camera, 6/9/98

51

4.

 

A second series of three clicks begins, as the camera takes three pictures.  A status bar
indicator displays as each (red, blue and green) picture is taken, along with the gain
that it is using for the picture:

The Status messages that appear for each image capture are as follows:

a)

 

Computing Exposure

 – The camera is sampling brightness levels in the image in

order to determine proper exposure times.

b)

 

Getting Red Image

 – The camera is downloading the red image to the PC.

c)

 

Getting Green Image

 – The camera is downloading the green image to the PC.

d)

 

Getting Blue Image

 – The camera is downloading the blue image to the PC.

e)

 

Processing – 

The camera is preparing to display the image.

!

Note:  If the exposure time for any one of the values (i.e., red, green, or blue) is
more than two seconds, a countdown clock displays the time.

5.

 

The newly captured image appears on screen for modification, editing, or annotation.
Following an image capture, several noticeable changes take place in the appearance
of the main SPOT screen:

−

 

The Edit and View menus become available.

−

 

The editing, save, and print related toolbar buttons are available (no longer

grayed).

−

 

The Get Image (last used exposure), Set Image Region, and Recall Previous
Exposures options on the Camera menu are available (no longer grayed).

Get Image (last used exposure)

The Get Image (last used exposure) option works in exactly the same way as the Get
Image (exposure from setup) option.  The difference in the two options is that the Get
Image (last used exposure) option uses the exposure times and gain from the previous
exposure, and is thus faster because it skips the initial auto-exposure sequence.  This is
convenient in cases where you are satisfied with the appearance of an image and want to

Summary of Contents for SPOT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands