DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 119 / 132

DHS Systems, LLC TM 95236-00 0016
0016-3
No rights are conveyed except as indicated in the legend on the cover of this document.
CLEANING THE ANCILLARY CASE
INITIAL SETUP:
Tools and Special Tools
Damp Cloth
Stiff Bristled Brush
Materials/Parts Equipment Condition
Water Equipment Powered Down
De-natured Alcohol Power Source Disconnected
C AUTION
Use of a damp cloth is authorized for cleaning the case and cables but care should be
exercised to ensure that water does not get into the connection of the cables or the electrical
components. Damage to the components may result from water, if water gets into the
connections, blow the connections out with compressed air, or allow to air dry before
connecting back to equipment.
SERVICE
1. Clean off any severe dirt or mud from the outer case using a stiff bristled brush.
2. Use a vacuum or compressed air to remove any loose debris from inside the ancillary case.
3. Clean the outer surface of the case and the interior surface of the case with a damp cloth.
4. Dry any excess water from the inside of the case using a lint free cloth.
END OF TASK