DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 115 / 132

DHS Systems, LLC TM 95236-00 0015
0015-3
No rights are conveyed except as indicated in the legend on the cover of this document.
9 DURING Control Panel 1. Check Control panel for proper
operation. Run control panel through all
screens to ensure proper operation of the
touch screen Control panel
not functioning.
Can use
computer
interface in its
place
2. Check vents on rear of control panel for
debris, clean as necessary with a damp
cloth.
3. Check all audio feed Inputs and Outputs
for proper switching No audio feeds
passing through
mixer
4. Check all video feed Inputs and Outputs
for proper switching No video feeds
passing through
mixer
5. Check Quad Screen view for proper
video feed switching
6. If available, initiate call using onboard
dialer, check for proper connection
2. Check all switches and knobs are
complete and function normally.
Ancillary
Devices
14 AFTER Speakers 1. Check connections on Speaker.
Remove all cables, check pins for damage
or debris, clean as necessary. Check dust
covers to ensure proper seating
2. Check all cables for damaged
connections or wiring. Wipe down cables
with a damp rag to remove dirt. Use
compressed air to clean out connectors as
necessary. Cables non-
mission capable
if pins are
damaged or
wiring is
exposed or
broken
15 AFTER Control Panel 1. Inspect Control Panel. Check screen
and case for damage. Clean screen with
anti-static computer screen wipes. Control panel
screen cracked
or broken
2. Check cable for damaged connections or
wiring. Wipe down cables with a damp rag
to remove dirt. Use compressed air to clean
out connectors as necessary.
Cables non-
mission capable
if pins are
damaged or
wiring is
exposed or
broken
16 AFTER Cables 1. Check all cables for damaged
connections or wiring. Wipe down cables
with a damp rag to remove dirt. Use
compressed air to clean out connectors as
necessary. Cables non-
mission capable
if pins are
damaged or
wiring is
exposed or
broken
END OF WORK PACKAGE