DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 59 / 132

DHS Systems, LLC TM 95236-00 0005
0005-11
No rights are conveyed except as indicated in the legend on the cover of this document.
The AVCS (MINI) has two HD-15F connectors for attaching to local video display systems or recorders.
Local Video Display Set up
1. Setup the local display system IAW instructions in the appropriate TM. If using DRASH/DC2E SXGA+ Projection
System, refer to TM95235.
2. Connect the HD-15 cable (Figure 9, Item 2) to the local display system (Figure 9, Item 1) video input connector.
3. Route the cable from the local display to the AVSL so that it does not interfere with the flow of traffic through the
Command Center to the DC2E (MINI) AVSC.
4. Select a VIDEO OUT HD-15 connector on the rear of the AVSC and remove the dust cover.
5. Insert the cable connection into the RGB 1 or RGB 2 (Figure 9, Item 3) connector and tighten down the two screw
locks to hold it in place.
RGB1 RGB2
VIDEOOUT
RGB1 RGB3
RGB2 RGB4
CV1
CV2
GND.
110ACONLY
INPUTONLY
EXTERNAL
DE VICE
CTL. IPRESET
CTL. LAN TOUCHPANEL POTSLINE
PROT ECTION
LINEA SP EAKE R
AUDIO OUT CONTROL
VIDEO IN
AUDIO IN
WEIGHTRANGE
80-100 LBS.
HARD IGG
FAU LT
PRESE NT
LINE
OK
isobar
LINE1
LINE2 MIC2
MIC1
3
RGB 1
RGB 2
VIDEO OUT
2
1
Figure 9. Connect Video Projector to AVCS (MINI) System.
END OF TASK