DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 58 / 132

DHS Systems, LLC TM 95236-00 0005
0005-10
No rights are conveyed except as indicated in the legend on the cover of this document.
SETUP AND ATTACH VIDEO OUTPUT DEVICES
RGBHV Device Setup Instructions
1. Identify the RGBHV input device (Figure 8, Item 1) to be used and position in its desired location.
2. Connect the HD-15 cable (Figure 8, Item 2) to the video output on the RGBHV device.
3. Route the cable so that it does not interfere with the flow of traffic through the Command Center.
4. Insert the cable connection into the RGB 1 or RGB 2 (Figure 8, Item 1) connector and tighten down the two screw
locks to hold it in place.
RGB1 RGB2
VIDEOOUT
RGB1 RGB3
RGB2
RGB4
CV1
CV2
GND.
110ACONLY
INPUTONLY
EXTERNAL
DE VICE
CTL. IPRESET
CTL. LAN TOUCHPANEL POTSLINE
PROT ECTION
LINEA SP EAKE R
AUDIO OUT CONTROL
VIDEO IN
AUDIO IN
WEIGHTRANGE
80-100 LBS.
HARD IGG
FAU LT PRESE NT
LINE
OK
isobar
LINE1
LINE2 MIC2
MIC1
3
RGB 1
RGB 2
VIDEO OUT
2
1
Figure 8. Connect Video Output Devices to AVCS (MINI) System.
END OF TASK