DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 50 / 132

DHS Systems, LLC TM 95236-00 0005
0005-2
No rights are conveyed except as indicated in the legend on the cover of this document.
Preparation for Set-up of the AVCS (MINI)
The initial set-up procedures for the AVCS (MINI) require two personnel due to the weight of the system. Once
the transit case is positioned, all other tasks may be done by a single individual. Refer to Equipment Description
and Data (WP 0002) for AVCS (MINI) system dimensions and weights.
WARNING
When performing the following procedures, ensure all cables are organized in
such a way to minimize personnel tripping hazard.
The AVCS (MINI) weighs in excess of 100 pounds and requires a 2 person lift.
Improperly lifting or carrying heavy equipment can result in serious injury.
If necessary, refer to Description and Use of Operator Controls, Indicators and
Connectors (WP 0004) for location and description of the items being used.
Figure 1. Typical Setup of AVCS (MINI).
1. Carefully remove two transit cases from transport vehicle and set in approximate locations inside operating
facility.
2. Inspect exterior of both transit cases IAW operator PMCS (WP 0015). Verify there is no physical damage.
END OF TASK