DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 64 / 132

DHS Systems, LLC TM 95236-00 0006
0006-2
No rights are conveyed except as indicated in the legend on the cover of this document.
Power Up AV System
NOTE
During the boot-up process, the system will ignore any touch panel input. While the system is
booting, a progress bar will indicate boot-up progress as well as display a notice that the system
is booting up.
1. Set the Main Power supply ON/OFF switch (Figure 1, Item 1), located on the top right rear of the AVSC, to
‘
ON ’. Ensure the Secondary Power Supply Switch (Figure 1, Item 2) always remains in the ‘ ON ’ position.
CP E
2
CONTROLPROCESSOR
PWR
NET
CRESTON
LAN
HW-R SW-R MSG LNK ACT
Alarm Activity Link QUADVIEW XL
2
RGB 1 RGB 2
VIDEOOUT
RGB 1 RGB 3
RGB 2
RGB 4
CV 1
CV 2
G ND.
11 0 AC ONLY
INPUT ONLY
EXTERNAL
DEVICE
CTL . I PRESET
CT L. LAN TOUCH PANEL POT S LINE
PRO TECTI ON
L INEA SPEAKER
AUDIOOUT CONTROL
VIDEOIN
AUDIOIN
WEIGHTRANGE
80-100 LBS.
HA RD IG G
FAULT
PRESEN T
LINE
OK
isobar
L INE 1
L INE 2 M IC 2
M IC 1
1
PROTECTION
FAULT
PRESENT
LINE
OK
Front of AVCS
Rear of AVCS
Figure 1: Main and Secondary Power Supply Switches.
2. Verify the speaker voltage select switch on the rear of speaker is set to the proper voltage. Set the Speaker
POWER On/Off switch to ‘
ON ’.
3. Power up all peripheral audio/video input devices according to their respective TM’s.
4. Power up all peripheral audio/video output devices according to their respective TM’s.