DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 52 / 132

DHS Systems, LLC TM 95236-00 0005
0005-4
No rights are conveyed except as indicated in the legend on the cover of this document.
9. Remove the thumbscrew from the ground connector and attach a ground cable from the AVCS (MINI) to the
GENSET or other power source ground. Replace the thumbscrew and tighten.
10. Remove the touch panel (Figure 3, Item 2) from the ancillary equipment case and position it at the operator’s
station.
11. Unwind the power cable (Figure 3, Item 1) and route to the AVCS (MINI) so that the cable does not interfere with
traffic flow in the operations area.
NOTE
If possible, utilize wire tracks to prevent personnel from tripping on the wire and causing damage to
the touch panel or injury to personnel.
12. Remove dust cover from the touch panel connector (Figure 3, Item 3) on the rear of the AVCS (MINI).
Figure 3. Control Panel Connector and Cable Connection for Touch Panel.
13. Connect cable to connector and lock into place by rotating locking ring clockwise.
END OF TASK