DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 111 / 132

DHS Systems, LLC TM 95236-00 0014
0014-1
No rights are conveyed except as indicated in the legend on the cover of this document.
OPERATOR MAINTENANCE INSTRUCTIONS
AVCS (MINI)
PMCS INTRODUCTION
GENERAL
This Work Package provides data necessary to keep the AVCS (MINI) operational ready. PMCS are performed
to keep the trailer and shelter in operational condition. The checks are used to find, correct, and report problems.
Personnel trained on the equipment are required to perform the tasks as indicated in Operator PMCS (WP 0015),
Table 1. PMCS are performed by the operator each time the equipment is operated.
WARNINGS AND CAUTIONS
Special attention should be paid to the WARNINGS and CAUTIONS appearing in the operator PMCS table. A
WARNING means someone could be injured. A CAUTION means equipment could be damaged.
EXPLANATION OF TABLE ENTRIES
Item Number – Numbers in this column are for reference. When completing DA Form 2404/ DA Form 5988E
(Equipment Inspection and Maintenance Worksheet), include the item number for the check/service indicating a
fault. Item numbers appear in the order in which the checks/services are performed for the interval listed.
Interval – This column indicates when a procedure must be performed (i.e., Before, During, or After an operation).
Item to Be Checked or Serviced – This Column identifies the item that is to be checked or serviced.
Procedure – This column describes the procedure that must be followed to ensure that the equipment is capable
of performing its intended mission.
Equipment Not Ready/Available If – This column lists conditions that make the AVCS (MINI) not fully mission
capable. If the problem can be fixed using the troubleshooting procedures and/or maintenance procedures in this
manual, do so. If not, document the items not able to be fixed on DA Form 2404/DA Form 5988E for operator
maintenance. For further information on how to use this form, see DA PAM 750-8. Be sure to observe and
annotate all special circumstances that appear/occur.
NOTE
Perform weekly as well as before PMCS if you are the assigned operator but have not
operated the equipment since the last weekly inspection, or if you are operating the equipment
for the first time.
If the equipment must be kept in continuous operation, only perform those procedures that will
not disturb operation. Complete checks and services when the equipment is shut down.
END OF WORK PACKAGE