DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 113 / 132

DHS Systems, LLC TM 95236-00 0015
0015-1
No rights are conveyed except as indicated in the legend on the cover of this document.
OPERATOR MAINTENANCE INSTRUCTIONS
AVCS (MINI)
SERVICE – PMCS
INITIAL SETUP :
References
WP
Table 1. Operator Preventive Maintenance checks and Services.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED
OR SERVICED
AVCS
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
1 BEFORE AVCS Case 1. Inspect case for cracks, damaged, loose
or missing hardware. Case interior
shows signs of
moisture or
equipment
excessively dirty
2. Inspect case interior for moisture or dirt.
Clean and dry as necessary.
2 BEFORE AVCS Front 1. Inspect all components for proper
mounting, moisture or debris.
2. Inspect components for damage, loose
or missing hardware.
3. Inspect components. Check operation of
lights and switches.
Equipment not
properly
mounted.
Switches or
lights
unserviceable.
4. Inspect components. Check component
screens for cracks, damage and proper
operation.
3 BEFORE AVCS Rear 1. Inspect rear panels. Check for
damaged, loose or missing hardware Circuit breaker
on surge
protector will not
stay set.
2. Inspect Surge Protector. Check Circuit
breaker not tripped. Check switches for free
movement. Check 110VAC connectors for
debris, clear if necessary. Ensure power
supply is proper level. Damage to
power
connector.
Moisture in
connector
3. Inspect Ground connector. Check
AVCS is properly grounded to the ground
and power source. AVCS not
properly
grounded
3. Inspect the cable connections. Ensure all
cables are connected securely to the
appropriate connection on the AVCS. Cables have
exposed wiring,
or connectors
broken